![](https://www.lneyathermal.com/wp-content/uploads/2022/10/SR.jpg)
SR -120℃~+250℃
PRODUCT ADVANTAGES
· Material Temperature Control Accuracy ±1.0℃
· Heating Power 25kW~80kW
· Circulation Pump 200L/min 2.5bar~750L/min 2.5bar
· Power 2.30kW~10.5kW
· Temperature Control Reactant temperature
· Heat Exchange Area 3.5㎡~20㎡
Appearance Structure
![](https://www.lneyathermal.com/wp-content/uploads/2022/10/SR.png)
TCU temperature control system USES the existing heat (such as steam, cooling water and cryogenic liquid – the “primary”) system infrastructure are integrated into the single fluid system was used to control the temperature of process equipment or in the secondary loop.This achieves only one type of heat transfer liquid can flow into the jacket of the reaction vessel (not directly flow into steam, cooling water or ultra-low temperature liquid).The temperature of the whole reaction process is controlled by operation.
Excellent performance, high precision, intelligent temperature control, very wide temperature control range, from -120 °C ~ 350 °C, suitable for most enterprises temperature control needs. Product temperature control accuracy of ± 0.5 ° C, cooling power from 0.5 kW to 1200 kW can provide the corresponding products.
Model | SR-35N SR-35NS SR-35NH SR-35NSH | SR-50N SR-50NS SR-50NH SR-50NSH | SR-80N SR-80NS SR-80NH SR-80NSH | SR-125N SR-125NS SR-125NH SR-125NSH | SR-200N SR-200NS SR-200NH SR-200NSH |
Temp. range ℃ | -120~ 250°C setting the max temp according to the supplier heating or cooling source) -40~135°C (The maximum temperature range can be operated by using glycol water formula.) | ||||
SR-N | A set of cooling heat exchanger, heat exchanger, through proportional adjusting valve control cold heat into the heat exchanger, then through the uniform medium input to the reactor jacketed to do heat exchange and temp. Control, system has inside expansion tank. | ||||
SR-NS | Besides SR- N function,add one set heater used to reduce high temp. | ||||
SR-NH | Besides SR- N function,add electrical heating function | ||||
SR-NSH | Besides SR- N function,add one set heater used to reduce high temp and electrical heating function | ||||
Expansion tank | 100L | 200L | 280L | 390L | 500L |
Heat exchanger area | 3.5㎡ | 5㎡ | 8㎡ | 12.5㎡ | 20㎡ |
Electric heating function H | 25KW | 35KW | 50KW | 65KW | 80KW |
With “H” has heating function | |||||
Control mode | Feed forward PID + Our special dynamic control calculation,LNEYA PLC controller | ||||
Communication protocol | MODBUS RTU protocol,RS485 interface,optional Ethernet interface/R232 interface | ||||
Temperature control selection | Reactor material temperature control | ||||
Temperature feedback | The temperature of three points: the inlet and outlet of heat-conducting medium, material in reactor(External temperature sensor), PT100 sensor | ||||
Material temp. feedback:PT100 or 4~20mA or communication given Temp.feedback:PT100 | |||||
Process temp. feedback | |||||
feedback:PT100 | |||||
Temperature accuracy | ±1℃ | ±1℃ | ±1℃ | ±1℃ | ±1℃ |
Circulation pump | 200L/min 2.5BAR | 250L/min 2.5BAR | 400L/min 2.5BAR | 500L/min 2.5BAR | 750L/min 2.5BAR |
Input and display | 7-inch color touch screen,temperature graph display | ||||
Safety protection | Self-diagnosis function;freezer overload protection;high pressure switch;overload relay;thermal protection device;liquid low level protection;high temp. Protection and temp. fault protection. | ||||
Perform valve | Electric proportional control valve, control signal 4~20mA. | ||||
Piping material | SUS304 | ||||
Connection size | DN40 | DN40 | DN-50 | DN-65 | DN-80 |
Dimension cm | 150*120*185 | 180*140*240 | 180*140*240 | 220*180*265 | 220*180*265 |
Power AC380V50HZ | 2.3kw(max) | 3.5kw(max) | 4.5kw(max) | 8kw(max) | 10.5kw(max) |
With H power AC380V 50HZ | 27.3kw(max) | 38.5kw(max) | 54.5kw(max) | 73kw(max) | 90.5kw(max) |
Case material | Cold-rolled sheet spraying (standard color 7035) |
![](https://www.lneyathermal.com/wp-content/uploads/2022/12/tcu05.jpg)
Product Applications
![](https://www.lneyathermal.com/wp-content/uploads/2022/10/wtd_application-1024x361.jpg)
Recommended ProductsUsed for Reaction
- More
ST 10℃~135℃
ST 10℃~135℃ PRODUCT ADVANTAGES · Material Temperature Control Accuracy ±1.0℃ · Heating Power 25kW~300kW · Circulation Pump 110L/min 2.5bar~600L/min 2.5bar · Power 1.8kW~7.5kW · Steam Pressure 4~6bar …
- More
ZLF -45℃~+250℃
ZLF -45℃~+250℃ PRODUCT ADVANTAGES · Material Temperature Control Accuracy ±1.0℃ · Heating Power 25kW~80kW · Circulation Pump 150L/min 2.5bar~750L/min 2.5bar · Power 2.30kW~10.5kW · Temperature Control Reactant tempe…
loading…
已经是到最后一篇内容了!