What should I do if the temperature difference between the inlet and outlet of the water cooled industrial chiller is small?
What should I do if the temperature difference between the inlet and outlet of the water cooled industrial chiller is small?
Technicians stated that when users use water-cooled chillers, they encounter this situation: the current inlet temperature is 24 ℃, and the outlet temperature is 23 ℃. The temperature difference is too small to meet user needs. There are several main reasons for the small difference in inlet and outlet water temperature:
1. The output cooling capacity of a water-cooled chiller is small, such as if the unit itself has faults or is not fully loaded. These can be preliminarily judged by observing the operating current and other parameters of the chiller.
2. It may also be due to poor heat transfer performance, such as severe scaling on the heat transfer tube, which affects the heat exchange of the chiller. This can be determined by observing the heat transfer temperature difference between the water temperature and the evaporation temperature.
3. The water flow rate of a water-cooled chiller is too high, which can be judged by observing the water pressure difference between the inlet and outlet of the evaporator, as well as the operating current of the water pump.
4. After troubleshooting the above issues, you can consider whether the sensor or thermometer is inaccurate.
How to ensure the stable cooling effect of industrial chillers? The following points need to be noted:
a. Regularly inspect the compressors of industrial chillers;
b. Regularly clean the condenser and evaporator of industrial chillers;
c. Regularly inspect various valves of industrial chillers;
d. Regularly replace the lubricating oil of industrial chillers;
e. Regularly replace the dry filter of the industrial chiller unit;
Related recommendations
single fluid heating cooling system
6Introduction to Single Fluid Heating and Cooling Systems Single fluid heating and cooling systems represent a convergence of heating and cooling technologies into a single, unified system. Inst...
View detailsHow to deal with abnormal flow rate of the circulating pump of the refrigerated chiller?
491How to deal with abnormal flow rate of the circulating pump of the refrigerated chiller? Abnormal flow rate of the circulating pump of the freezer may lead to a decrease in cooling effe...
View detailswater bath maintenance
20Water Bath Maintenance: Ensuring Optimal Performance and Safety Water baths are indispensable pieces of equipment in laboratories, playing a vital role in maintaining precise temperatures for a...
View detailsWhy does the lab water chiller compressor burn out?
502Why does the lab water chiller compressor burn out? 1. One of the reasons is that due to a lack of phase, prolonged use can lead to burnout. The refrigeration compressor has correspondi...
View details
HelloPlease log in